Landscape Lighting Repair

Landscape lighting adds a beautiful ambiance to your home at night. However, like all outdoor lighting systems, routine care and maintenance are required to keep your system running smoothly.

Landscape Lighting

Many Landscape Lighting Repair Orlando could be avoided by regular maintenance! This article will cover how and why your low-voltage landscape lighting may need repair.

Depending on the materials used and how well your landscape lighting system was installed, some fixtures may be able to be fixed. If your lights were purchased in the clearance section of a home improvement store there’s a good chance they are made from aluminum or plastic and need to be replaced. However, high quality landscape lighting fixtures are made of copper and brass and can withstand lots of weather elements, including heat and moisture. Fixtures are most likely to break down due to corrosion on wire connections or bulb contacts caused by constant exposure to the elements.

When a fixture fails to turn on it is usually because the light bulb is burned out or the socket has no electricity, this is easily fixed by replacing the light bulb or using a voltage meter to check if the socket is getting any power. If not then it is time to replace the fixture.

Another common problem with landscape lighting is when there’s a short within the system. This happens when the direct burial wire that powers the lighting gets damaged by roots, rocks or just wear and tear. When this happens it causes electricity to jump across connections and creates heat, which can melt wire or even cause a fire.

The best way to avoid this is to use a professional to install and maintain your lighting system. A good landscape lighting installer will always use the proper products, optimal installation techniques and routine maintenance to prevent problems.

It’s also important to keep in mind that your landscape changes over time and that your lighting needs to change as well. Sometimes it is just a matter of raising a fixture up higher on a tree or moving a fixture because of overgrowth in bushes. Other times it may be a more serious issue like a leaking fixture that needs to be replaced. When this happens it’s a good idea to consult with a lighting specialist to make sure you’re getting the right type of fixture that will stand up to the climate conditions of your yard.


A beautiful lighting system can transform your yard into a glowing, inviting nighttime space. However, these systems can’t function without proper maintenance and occasional repairs.

If you’re experiencing issues with your landscape lighting, there’s a good chance that it could be due to a faulty electrical connection. Luckily, these types of connections are easy to repair and are often the result of corrosion on wire or bulb contacts caused by the constant exposure to outdoor elements. To fix this, simply remove the bulb and use an emery board or sandpaper to clean off any corrosion on the contacts, then spray them with contact cleaner before installing the new bulb.

Corrosion is most commonly found at the points where your fixture connects to its main line, which will be either slightly underground or buried in your mulch. Because they’re so exposed, these connections are particularly susceptible to moisture, which can erode the metal and lead to a short circuit. To prevent this, we recommend using waterproof connectors designed specifically for low voltage underground splices. This is a much safer solution than trying to use tape or other quick fixes that can actually make the problem worse.

Another common reason for landscape lighting problems is that the fixture sockets have become corroded. These sockets can usually be easily replaced with a new, high quality bulb. However, if multiple sockets in your system have a similar issue, then it may be a sign of poor design or engineering within the fixture itself.

It’s also possible that your landscape lights are not receiving sufficient voltage from their transformer, which is the power center of any lighting system. When copper wires lose their conductivity over time, it can cause voltage drop that reduces the amount of current that’s sent to each light fixture. This can also cause lights to dim or stop working altogether.

The best way to ensure your landscape lighting stays in tip-top shape is to have a professional perform regular maintenance and repairs. They’ll not only help your home look its best, but they can also help you save on energy costs by ensuring that your lights are running as efficiently as possible.


A landscape lighting system can do so much to accentuate the beauty of your home and property. However, like all systems it requires regular maintenance to keep things looking their best. While some problems with outdoor lighting may seem solvable, others can be quite complex and require a professional.

It’s important to work with a lighting contractor that uses quality equipment and provides comprehensive maintenance plans for their clients. This will go a long way in reducing the need for costly repairs and help ensure that the system is functionally sound. However, even if you have the best equipment and installers on your side, it is still possible for landscape lighting to develop issues due to the age of the fixtures, wires or other factors.

One of the most common problems in landscape lighting occurs when a light fixture goes out. When this happens, it can be a real pain to get the lights working again. The good news is that most of the time, this problem can be solved with a simple inspection and minor repair.

This type of problem is typically caused by a short within the wiring system. A short is when electricity arcs over the direct burial wire that powers the landscape lighting system. This can happen for a number of reasons, including improper installation, the use of substandard materials, a poor connection, moisture damage within the system and even places where the wire is stretched over roots or rocks.

Another common issue with landscape lighting is when a light fixture’s bulb burns out. This can happen for a number of different reasons, including over-use or simply the natural aging of the lamp. If a light fixture is going out often, it may be time to replace the lamp.

During a routine lighting maintenance, the team of professionals at Sposato Irrigation will check all wire connections and bulbs. They will also look for any obstructions that could be blocking the light or causing it to not function properly. This includes cutting back any plants, shrubs or trees that are too close to the fixtures and removing debris from the fixture, such as mud, dirt or bugs. Keeping the area around each fixture clean can improve illumination, lengthen the life of the fixtures and, in some cases, prevent fire hazards.


Landscape lighting adds value to your home and makes a beautiful accent in your garden or yard. However, it requires regular maintenance and occasional repairs in order to continue working well. A knowledgeable lighting design company can help you get the most out of your outdoor lighting system and make sure it continues to look its best.

When it comes to Landscape Lighting Repair, the first thing you need to do is check for any visible damage or problems. This can include a broken fixture or a wire that is showing signs of wear and tear. If you find any problems, it’s important to turn off the power to your lighting system before attempting any repair work.

You can also look for signs of corrosion on metal fixtures. This can often be caused by the elements and a lack of care. Cleaning your landscape lighting fixtures with a soft cloth and soapy water can help prevent this problem. If your fixtures are made of brass or copper, you may need to use a special polish to keep them looking their best.

It’s also important to choose the right fixtures and bulbs for your lighting system. This will not only impact the look and feel of your space, but it will also determine how much light is needed for each area. Lighting experts can advise you on what type of fixtures and bulbs to choose for your landscape lighting.

Finally, it’s important to research any landscape lighting repair service before hiring them. A reputable lighting repair company will have years of experience and a proven track record of customer satisfaction. They will also offer a warranty on their products and workmanship. They should also be licensed and insured for your protection.

A well-designed landscape lighting system can be one of the best investments you make for your Memphis property. But, if your lighting system is not working properly, it can quickly become a costly headache. With a little bit of detective work, you can determine what is causing your lights to stop working and fix the issue before it becomes more complicated.